WAUKESHA VALVES – W265/W285 FD HTST – DIVERT VALVE

“Divert Valves – Overview”

 

SPECIFICATIONS

W265 FD Standard Flow Diversion Valve Assembly

W285 FD Stem Flush Flow Diversion Valve Assembly

 

FEATURES

SIZES: 1″, 1-1/2″, 2″, 2-1/2″, 3″, 4″

• Flush ports
• Snap on Tef-Flow™ P Seats
• Maintainable actuators (4″, 5″, 6″)
• Use with existing control system
• Transparent control module (with or without solenoid)
• S- or I-clamp connections (S is standard)
• Two valves with interconnected bodies
• Two-position, three-way valves with independent actuators (air-to-raise)
• The spring in the actuator holds the valve in the Divert position
• Air pressure positions the valve in the Forward Flow position
• Valve bodies (divert valve and leak detect valve) produce one inspection mode, and three operating modes (Divert, Flush, and Forward Flow)
• High pressure adapter for sizes 1″ through 2-1/2″

 

 

*See SPX manuals on W265/W285 HTST Divert Valve located under the Manuals tab